190 V12 Project build Engine removed from the W140 so engine is removed from the engine bay it is really big so I hope it will fit in the much smaller engine bay of the w201 engine bay

190 V12 Project build Engine removed from the W140 600 SEL donor car
i first had the propshaft removed and the automatic gearbox
i could leave the gearbox connected to the engine
but this is the first time i remove a engine from a W140 and also the first time i use my engine lift  so i wanted the most easy way to lift it out
i work out very good

only thing  found is a broken tube from the oil breather pipe
this is a much seen thing with these engine’s
also 2 knock sensors from the same cilinder bank where a little molten on the outside. i need to look into this but not sure if i’m going to use them.

both valve cover gasket are leaking a little but the have been used again because the have silicon gasket on them. so need to be changed
also aircon. pump  and steerin pump are leaking a lot on the connections but the will be removed

Don’t forget to have a look on my youtube channel for the full playlist and if you like the project don’t forget to subscribe to the page for more project and reviews!!
Mercedes 190 V12 project engine swap have look in the 190 V12 project page for all the video’s

JMSpeedshop !