Mercedes w201 V12 Project-Build last chassis mod. wiring loom removed
for the full project visit JMSpeedshop.com or look in the playlist

so the last modification is done to the chassis
on the steering axle side i removed a piece and welded a plate back
in so i have more room to route the downpipes on the driverside for the manifold to under the car

i also replaced the a piece of the engine bay wiring loom
the part for the headlamp on the passenger side was internally burnt because of a fault in the loom
i have replaced this section with a oem piece of a junkyard car
after this i removed the complete wiring loom from the engine bay

to remove the loom you need to disconnect the plugs on the inside of the car from the fuse box
and anothere 3 plug that are placed on the firewall
also the window wipermotor is connected with a plug in the fuse box on the underside

what i think is a weird placement because you can not reach the plug when the fusee box in place

when i removed the loom i labeled all the othere connectors
to make sure i know the located when i needs be installed again

next is the repair on the driverside wheel arch and coating the inside . also grit blast the inside engine bay and paint the inside of the engine bay

for questions just aks

JMSpeedshop.com

Music by Andrew Applepie
http://www.andrewapplepie.com
https://youtube.com/andrewapplepie
https://andrewapplepie.bandcamp.com/

and music by MAXWELL – i love

Mercedes w201 V12 Project-Build last chassis mod. wiring loom removed